The choice around the globe!
The Raymarine ST60+ offers everything from stand-alone display units to sophisticated, fully-integrated systems. Significantly enhanced displays ensure superior viewing angles for both day and night conditions. Simple, push-button controls make Raymarine ST60+ instrument displays extremely easy to use.
- Thank you for purchasing a Raymarine product. We are sure your ST60 instrument will give you many years of trouble-free operation. This handbook describes how to install and use the Raymarine ST60 Tridata instrument. This instrument provides accurate depth, speed, trip and timer information, on a high quality Liquid Crystal Display (LCD).
- Thank you for purchasing a Raymarine product. We are sure your ST60 instrument will give you many years of trouble-free operation. This handbook describes how to install and use the Raymarine ST60 Multi instrument. This instrument provides a wide range of accurate depth information, on a high quality Liquid Crystal Display (LCD).
This handbook describes how to operate, maintain and install the Raymarine ST60 Wind instrument and ST60 Close Hauled Wind instrument. These instruments show:. Wind speeds and directions. Velocity Made Good (VMG) information, when boat-speed information is available,. Tack angle, when heading information is available. 1.1 Introduction The Raymarine ST60 Graphic Display uses a high-quality dot-matrix screen to display wide a range of data, both from Raymarine via SeaTalk, and from other equipment via NMEA. The ST60 Graphic Display can also supply SeaTalk data to NMEA 0183. Raymarine ST60+ instruments offers everything from stand-alone display units to sophisticated, fully-integrated systems. Significantly enhanced displays ensure superior viewing angles for both day and night conditions. Simple, push-button controls make Raymarine ST60+.
Features
|
Monitor your Raymarine ST60+ Instrument DisplaysMonitor your Raymarine SeaTalk instruments with the wireless SmartController. Wireless operation means freedom to view vital information when on deck or out of sight of your instruments. |
Raymarine ST60+ Instrument Displays
Raymarine ST60+ Speed Instrument Display
| |
Raymarine ST60+ Depth Instrument Display
| |
Raymarine ST60+ Tridata Instrument Display
| |
Raymarine ST60+ Compass Instrument Display
| |
Raymarine ST60+ Wind Instrument Display
| |
Raymarine ST60+ Rudder Instrument Display
| |
Raymarine ST60+ Close Hauled Wind Instrument Display
|
Raymarine ST60+ Graphic Repeater Instrument Display
|
- 0 Vote(s) - 0 Average
St60+ no wind speed or directional display |
Post: #1 |
St60+ no wind speed or directional display Hi I have a st60+ wind with a masthead transducer and I have no speed data or direction. Dials do move in boat show mode. Voltages at display are Red to shield 8.02 Blue to shield 7.31 Green 7.31 Yellow 8.04. There is power to the display, I have three dashes in the speed area. I can not calibrate or place the display in master mode. It is stuck in repeater. I have done factory reset a number of times. I thought there was a hard reset that could be done but I forgot the key sequence. Any help would be appreciated. Thanks, Mark |
01-23-17, 04:50 PM (This post was last modified: 01-24-17 09:05 AM by Chuck - Raymarine - Moderator.) |
RE: St60+ no wind speed or directional display Mark, See my comments below regarding the transducer test measurements which you have performed: - Red to shield 8.02 ... normal - Blue to shield 7.31 ... high indicative of no ground reference - Green 7.31 ... high indicative of no ground reference - Yellow 8.04 ... high indicative of no ground reference Should the wind transducer's ground lead (black/bare lead) be connected to the wind transducer ground terminal (grey) and the problem persists, then it may indicate a problem with the wind instrument not providing a ground reference via its wind transducer ground terminal. Such failures may sometimes be worked around simply creating a jumper lead and then using it to create a jumper between the SeaTalk ground terminal of the wind instrument and the wind transducer's ground lead. Please note that Raymarine can no longer service ST60/ST60+ instruments. Should the instrument need to be replaced, then it may be replaced with a i60 Wind Instrument. |
Post: #3 |
RE: St60+ no wind speed or directional display Hi Chuck, Thanks for the help and sorry if this is duplicate, I'm having trouble navigating this forum. Where is the ground terminal on the wind transducer. Is it a screw on the installation pad/puck. Are there wiring connectors under the puck or is the wire hard wired to the puck/pad. Following your train of thought there could be a bad/corroded connection on the screw in portion of the transducer as well. Let me know your thoughts. Thanks, Mark |
Raymarine St60 Wind Service Manual Instructions
![Raymarine st60 wind vane Raymarine st60 wind vane](/uploads/1/2/4/6/124615994/948915083.jpg)
01-24-17, 10:08 AM (This post was last modified: 01-24-17 10:10 AM by Chuck - Raymarine - Moderator.) |
RE: St60+ no wind speed or directional display Mark, While less likely, it is indeed possible for corrosion of the masthead transducer's pins or mounting block may be responsible for preventing a ground reference. Please click here to view a FAQ addressing the pinout for the masthead transducer and mounting block. Please click here to view a FAQ addressing the pinout for a SeaTalk socket. The wind instrument transducer display's transducer ground terminal features gray marking. |
Post: #5 |
RE: St60+ no wind speed or directional display Hi Chuck and thanks for the information. To confirm you suggest trying a jumper wire on the instrument from sea talk ground to transducer ground. Is that correct? Thanks for confirming and I understand no guarantees, Mark |
Post: #6 |
RE: St60+ no wind speed or directional display Mark, Q) To confirm you suggest trying a jumper wire on the instrument from sea talk ground to transducer ground. Is that correct? A) Yes. |
01-25-17, 12:20 PM (This post was last modified: 01-25-17 01:11 PM by Chuck - Raymarine - Moderator.) |
RE: St60+ no wind speed or directional display Hi Chuck, I made the jumper, installed, and tested with no improvement. |
Post: #8 |
RE: St60+ no wind speed or directional display Mark, Unfortunately, as the jumper did not resolve the problem, then the fault may be rooted in the wind instrument or the transducer. As Raymarine can no longer service ST60+ instruments, you may want to consider sending the wind transducer to Raymarine’s Product Repair Center to be bench checked / serviced. Should the transducer be found to be operational, then the ST60+ Wind may be replaced with an i60 Wind or with the combination of an i70 MFID and iTC-5 Analog Instrument Transducer Converter. |
« Next Oldest | Next Newest » |
Raymarine St60 Wind Service Manual Free
User(s) browsing this thread: 1 Guest(s)
Raymarine St60 Wind Vane
Raymarine St60 Wind Troubleshooting
Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication